BHXKQ - ID 7322T120 340 VOC GRAY TOPCOAT 36320

  • MSDS: BHXKQ
  • Manufacturer: DEXTER COATINGS
  • Product Name: ID 7322T120 340 VOC GRAY TOPCOAT 36320
  • National Stock Number: 8010-01-293-6188
Product Identification

Product ID:ID 7322T120 340 VOC GRAY TOPCOAT 36320
MSDS Date:03/26/1990
FSC:8010
NIIN:01-293-6188
Kit Part:Y
MSDS Number: BHXKQ

Responsible Party
DEXTER COATINGS
31500 HAYMAN ST
HAYWARD, CA 94544-7120
US

Emergency Phone: 415-471-7171, 415-791-1961 (NIGHT)

Info Phone: 415-471-7171

Preparer: CAP

Cage: 0HKK2

Contractor
DEXTER SPECIALTY COATINGS
HAYWARD, CA 94544 US

Telephone: 415-791-1961

Cage: 0HKK2

Ingredients

2,4 PENTANEDIONE

CAS: 123-54-6

RTECS: SA1925000

Fraction By Weight: <10%


N-BUTYL ACETATE (SARA III)

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: <10%

OSHA PEL 150 PPM/200 STEL

ACGIH TLV: 150 PPM/200STEL;9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: <10%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


METHYL N-AMYL KETONE

CAS: 110-43-0

RTECS: MJ5075000

Fraction By Weight: <10%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9192


1-METHOXY 2-PROPANOL ACETATE (VAPOR PRESSURE 3.8 MM HG @

CAS: 108-65-6

RTECS: AI8295000

Fraction By Weight: <10%


ETHYL 3-ETHOXYPROPIONATE (VAPOR PRESSURE 1.11 MM HG @ 20C)

CAS: 763-69-9

RTECS: UF3325000

Fraction By Weight: <10%


VOLATILE ORGANIC CONTENT 3.3 POUNDS PER GALLON LESS WATER

RTECS: 9999999VO

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITANT TO EYES AND SKIN. ALSO MAY
AFFECT THE FOLLOWING ORGANS, LIVER, BLOOD AND THE CENTRAL NERVOUS
SYSTEM.
Effects of Overexposure:OVER EXPOSURE BY INHALATION MAY CAUSE
IRRITATION OF THE RESPIRATORY TRACT, HEADACHE, DIZZINESS OR
DROWSINESS.
Medical Cond Aggravated by Exposure:UNKNOWN AT THIS TIME.

First Aid

First Aid:EYES: FLUSH IMMEDIATELY WITH LARGE AMOUNTS OF RUNNING WATER
FOR AT LEAST 15 MINUTES. SKIN: REMOVE CONTAMINATED CLOTHING AND
WASH SKIN WITH SOAP AND WATER. INHALATION: REMOVE FROM EXPOSURE.
INGESTION: DRINK WATER. CONSULT DOCTOR IF NECESSARY.

Fire Fighting

Flash Point Method:SCC
Flash Point:34.0F,1.1C
Lower Limits:1.05
Extinguishing Media:USE CARBON DIOXIDE, FOAM, DRY CHEMICAL, OR WATER
FOG.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITIONS, AVOID
BREATHING VAPORS, VENTILATE AREA, AND REMOVE WITH INERT ABSORBANT
AND NON-SPARKING TOOLS.

Handling

Handling and Storage Precautions:DO NOT TAKE INTERNALLY. CONTAINERS
SHOULD BE GROUNDED WHEN POURING. AVOID FREE FALL OF LIQUID IN
EXCESS OF A FEW INCHES.MAKE SURE THE DRUM IS COMPLETE
Other Precautions:LY EMPTY BEFORE ATTEMPTING TO WELD OR BRAZE. THE DRUM
SHOULD BE INDUSTRIALLY CLEANED PRIOR TO REUSE. DO NOT FALME CUT,
BRAZE, OR WELD WITHOUT A NIOSH APPROVED RESPIRATOR OR APPROPRIATE
VENTILATION.

Exposure Controls

Respiratory Protection:WHEN GENERAL DILUTION OR LOCAL EXHAUST FAILS TO
DILUTE THE TWA/PEL, USE NIOSH/MSHA APPROVED AIR LINE TYPE
RESPIRATORS OR HOODS FOR ENCLOSED AND CONFINED AREAS. SEE FILE FOR
MORE DATA.
Ventilation:PROVIDE GENERAL DILUTION OR LOCAL EXHAUST VENTILATION TO
KEEP TWA AND LEL BELOW ACCEPTABLE LIMITS AND TO REMOVE DECOMP.
Protective Gloves:CHEMICAL RESISTANT GLOVES, CONTACT
Eye Protection:CHEMICAL SPLASH SAFETY EYEWEAR
Work Hygienic Practices:KEEP CONTAINER CLOSED WHEN NOT IN USE.
Supplemental Safety and Health
METHYL ETHYL KETONE (9%) LISTED BY SARA 313. BENZENE (.00030%) LISTED
BY PROP. 65.

Chemical Properties

Boiling Pt:B.P. Text:172 TO 337F
Vapor Density:>THAN AIR

Stability

Stability Indicator/Materials to Avoid:YES
NK
Stability Condition to Avoid:EXTREME HEAT TO DECOMPOSITION TEMPERATURE
Hazardous Decomposition Products:FUMES MAY CONTAIN CARBON MONOXIDE AND
OXIDES OF NITROGEN. MAY PRODUCE HAZARDOUS FUMES WHEN HEATED TO
DECOMP TEMP/WELDING

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.